Finally got to a point on the wiring that the firewall could be mounted permanently.
I'll start working on getting the engine mounted this weekend.
Chris made more progress today with the wiring. Really starting to take shape. I was able to permanently mount all the units in the panel.
Here are a couple of shots of the wiring progress...
Left side
Front
Right Side
I made up a bracket to hold the two relay/circuit boards for the ingnition circuit. It attaches to the bottom of the bracket holding the ECU. It will be powder coated to match the rest once Chris is done wiring it up.
Last but not least I finished up with the brake lines going to the remote reservoir. Once the firewall is in place I can mount the reservoir. Looking closely, you can see the reservoir zip tied to the frame. Following the stainless line down to the tee it then branches off to the right pedal while continuing straight down to the left pedal.
