This was/is (hopefully) the last hole I have to put into the firewall. I finally got around to drilling the hole for the throttle cable. I had to drill it from the inside and the titanium firewall hasn't gotten any easier to drill through. It's the gray cable going into the blue bulkhead fitting. Got it done though. I'll hook it up later...
Next, I re-installed the fuel pump/fuel filter/check valve assembly onto the tray I made for them. I also hooked all the hoses/lines back up.
Last, the fuel pressure sensor adapter arrived and I temporarily installed it. There is a Rotax (Gold Part) pressure sender screwed into it but I think I need a higher pressure sender. I have to verify and order it.
