Got it all fitted and tacked down. I made the same patch for the two forward cuts but applied it before I put any heat on it. Worked much better on this side and will conceal the cuts much better.
Saturday, April 4, 2020
Covering - Interior, Right Front
I began the day by finishing the left front. Installed the doilies and did the final shrink on it. Looks pretty good.
After completing that task I moved on to the right side. First thing is to prep the frame by scuffing with a scotch brite pad every where glue will go. Next, to clean with the Acetone solution and apply the first glue coat. I let that dry and then on with the second coat. Now, I was finally ready to start fitting the fabric. Just as I did with the left side, I started by locating and cutting a hole for the middle cable pass through. That pretty much centers the fabric and I work forward from there.
Got it all fitted and tacked down. I made the same patch for the two forward cuts but applied it before I put any heat on it. Worked much better on this side and will conceal the cuts much better.
Tomorrow I'll do the final shrink, apply doilies and finishing tapes.
Got it all fitted and tacked down. I made the same patch for the two forward cuts but applied it before I put any heat on it. Worked much better on this side and will conceal the cuts much better.
