Worked on the wiring today. Chris and I sorted out the ground wires and rerouted them to the pilot's side of the plane since I mounted the ground tree on that side. This required quite bit sorting the wires to find the optimal routes. Chris wired up the solenoids, battery, the master switch and VPX. Everyday a little closer to finishing up.
We separated out the black wire grounds from the white wire grounds and will begin terminating the white wires on the far side of the ground plane working across to the near side with the black wires. Once all the grounds have been terminated we'll fire up the panel and smoke check it. If there are no problems, we'll start tidying everything up.
