More Wiring.

Chris came over a we worked on wiring today. Ran some more wires for the GTR20 Comm 2 radio. Made up the D-Sub plug for the GTR20 minus a couple of wires, we ran out. Ran another set of wires for the GSA28 Autopilot Servos. Starting to get a bunch of wires up front!

Installed plugs on the Landing and Taxi lights.

Put plugs on the Elevator Trim Servo and ran the wires for it.

I placed the wires for the Trim Servo in a vinyl tube and Hysol'd it to the elevator to secure it from moving around between the fabric when covered.

I did the same thing for the Rudder Tail Strobe Light.

Clipped the Elevator and Tail wires for plugs. Will install them later. I did install some heat shrink to protect the wires making the transition from elevator/rudder to the fuselage.

p

Ran out of some wire, so we'll have to finish up the tail wiring once the new wire arrives. Then the fuselage will be ready to start covering.